This article covers the main requirements you will need in order to setup our hosted PBX service.
In order for you to ensue you have a good call quality, you will need to have a QOS (quality of service) enabled internet connection. This means that a certain percentage of your bandwidth should be reserved for high priority data packets so that call quality isn't affected.
To improve your QOS, we recommend dropping video or data packets and reserving usage for call packets instead.
The internet connection speed must be** 50kbps or more per user**, upstream and downstream.
Our system can work with any handset that supports SIP over the TCP protocol using two Codecs, G722 or G711.
If you use soft phones then our PBX phone system will function along side of your current soft phone setup.
If you use hard phones, these do need to be internet based and we do recommend a particular device being the Yealink T4x series; the Yealink T4x Range of handsets are able to send DND State Codes back to the Hosted PBX server, which will improve the reporting in the Infinity Portal.
Please contact our Support Team if you would like to discuss the handset options in more detail.
It's important that you have someone on-site who is comfortable in assisting with the configuration of the handsets.
Infinity do not provide on-site assistance, however we have written our PBX Handset Configuration Guide to point you in the right direction, and you are welcome to ask questions to our Support Team.
It is important we can start work as quickly as possible on your Dial Plan or IVR requirements, therefore the sooner we can scope this out the better.
Please have a look at our IVR and Dial Plan page for more information about what we can provide.
Please login to rate this article